Stamped Concrete vs. Pavers Cost in 2026: Patio & Driveway Comparison
Stamped Concrete vs. Pavers: Cost Comparison for 2026 Stamped concrete costs $8-$28 per square foot installed in 2026, while interlocking pavers run $10-$50/sq ft -- making stamped concrete 20-40% cheaper at the budget end but nearly equal at the mid-range. For a 400 sq ft patio, stamped concrete runs $4,800-$8,000 and pavers cost $6,000-$12,000. The cost gap narrows on larger projects and reverses when you factor in paver's easier repair and longer lifespan. Consider a pair of patios built in the same Newtown neighborhood. One homeowner chose stamped concrete (ashlar slate pattern) at $14/sq ft -- total $5,600 for 400 sq ft. The neighbor chose Belgard pavers at $22/sq ft -- $8,800 for the same area. Three winters later, the stamped concrete had a 6-foot crack running through the main seating area from frost heave. The repair cost $800 and never matched the original color. The paver patio? Three units...
How Much Does a Paver Patio Cost in 2026? (Materials, Labor & Size)
How Much Does a Paver Patio Cost in 2026? widget { "type": "slider-comparison", "id": "paver-patio-cost-estimator", "title": "Paver Patio Cost Estimator (2026)", "description": "Drag to your patio size and compare installed cost across the four main paver materials.", "config": { "slider": { "label": "Patio size", "min": 50, "max": 800, "step": 10, "default": 300, "suffix": " sq ft", "format": "number" }, "outputs": { "label": "Low estimate (budget concrete)", "formula": "value 12", "format": "currency" }, { "label": "High estimate (premium stone)", "formula": "value 50", "format": "currency" } , "comparison": { "items": { "label": "Concrete pavers", "formula": "value 16" }, { "label": "Brick pavers", "formula": "value 19.5" }, { "label": "Porcelain pavers", "formula": "value 24" }, { "label": "Natural stone", "formula": "value 35" } , "format": "currency" } } } A paver patio costs $12 to $28 per square foot installed in 2026, with total projects ranging from $1,200 for a small 100 sq...
How Much Concrete Do I Need? Concrete Calculator for Slabs & Footings
How Much Concrete Do I Need? Concrete Calculator for Slabs & Footings Concrete is calculated in cubic yards. For a 4-inch thick slab, you need approximately 1.23 cubic yards per 100 square feet. A typical 10×10 patio slab requires about 1.3 cubic yards of concrete, or approximately thirty 80-pound bags if mixing by hand. On a typical 12x20-foot driveway extension, the formula calculates 3.3 cubic yards, but ordering 3.75 to account for uneven ground is the safer call. The total comes to $565 in ready-mix concrete, and that extra often gets used in full -- subgrade low spots can swallow nearly half a yard more than the formula predicts. That gap is why rounding up matters more than any waste percentage chart. Use our Concrete Calculator(/construction/concrete-calculator) to get precise quantities for slabs, footings, columns, and more. !Concrete volume calculator showing cubic yards needed for common slab sizes including patio, sidewalk,...